Split solar water heater


Split solar heating system with one copper coil inside water tank

SS-M1
1.The solar collector and water tank can be placed separately, easy to install, easy for building integration.
2.The water tank is indirect tank with copper coil exchangers, completely solve the problem of collector in freezing and hard water area.
3.Copper coil exchangers can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy.
4.Reliable electric back-up with protection against dry heating and thermal cut-out.
5.Low breakdown rate and easy maintenance.
6.Easy operation and intelligent control.

Working principle:
The SS-M series, in streamline closed circuit systems which are recommended for frost prone and poor water quality situations. Antifreeze fluid is used to circulation through the collectors. The heat collected from the panels is transferred from the fluid pipes to the water tank by a heat exchanger. The circulator is regulated by a control unit on the water heater. This ensures the optimum use of the sun’s free energy. Copper coils exchanger can realize the cycle for solar energy and the cycle for electric heater or gas for supplementary energy to ensure you always have hot water on tap at any weather.
Send Inquiry
Share to:

solar water heater system, solar vacuum tube, split solar heater


Description

Product Features

1.Food-grade stainless steel SUS304-2B inner tank,Maximum anti Pressure1MPa
2.Copper coil heat exchanger, high heat transfer efficiency.
3.Double Copper coils heat exchanger, Can be combined with auxiliary electricity, gas and other boiler to Auxiliary heating, Achieve all-day hot water.
4.High Efficiency Heat Pipe solar collectors, three target vacuum tube、Collector and roof Combined beautiful, Easy installation.
5.Integrated workstation,different Temperature cycle,make system Efficient and energy saving.
6.Install the location of water tank no limited, Can be installed according to the layout of the room.
 
Detailed Product Description:



 

Technical Data:

System model
SS-M1-150
SS-M 1-200
SS-M1 -250
SS-M1-300
SS-M1 -400
SS-M1 -500
Tank capacity(L)
150
200
250
300
450
500
Copper coil qty
1/2
1/2
1/2
1/2
1/2
1/2
Solar collector model
SC-H-15/20
SC-H-20/24
SC-H-25/30
SC-H-30/20
SC-H-20/24
SC-H-25/30
Solar collector qty
1/1
1/1
1/2
1/2
2/2
2/2
Controller model
SR868C8
SR868C8
SR868C8
SR868C8
SR868C8
SR868C8
Work station model
VSP-S1
VSP-S1
VSP-S1
VSP-S1
VSP-S2
VSP-S2
Expansion tank spec
12L
12L
18L
18L
24L
24L
Medium volume
12L
12L
18L
18L
24L
24L
Recommended Flow
1.0~2.0L/min
1.2~2.5L/min
1.5~3.0L/min
3.0~5.0L/min
4.0~7.0L/min
5.0~8.0L/min
Max temperature of tank
95℃
95℃
95℃
95℃
95℃
95℃
Max temperature of system
95℃
95℃
95℃
95℃
95℃
95℃
Rated pressure of the tank
0.7MPa
0.7MPa
0.7MPa
0.7MPa
0.7MPa
0.7MPa
Media pre pressure
0.2~0.3MPa
0.2~0.3MPa
0.2~0.3MPa
0.2~0.3MPa
0.2~0.3MPa
0.2~0.3MPa
Max pressure of system
0.6MPa
0.6MPa
0.6MPa
0.6MPa
0.6MPa
0.6MPa
Voltage
AC220V 50Hz
AC220V 50Hz
AC220V 50Hz
AC220V 50Hz
AC220V 50Hz
AC220V 50Hz
Recommended pipe diameter
φ15
φ15
φ15
φ15
φ22
φ22

sidite01
sidite03
sidite05
sidite08